Products

 

Powered Turret

Powered Turret Features:

  1. Turret rotation and indexing is driven by a special servo motor.
  2. Tool holders are driven by a spindle motor that features high torque output and no noise.
  3. Fast tool change without change error.
  4. Powered tool holders meet DIN69880 and DIN5480 standards.
  5. Repeatability accuracy reaches 0.003 mm.
  6. Three-piece type curvic clutch ensures high positioning accuracy.

LS-160DTR

Turret center height 80 mm

 

SERVO TURRET:
Servomotor: Mitsubishi HG-SR102JK ; Gear ratio 1/24
Hydraulic power source: P = 30 kg / cm²

Hydraulic cylinder clamping force 2,350 kg

 

POWERED TOOL HOLDER:
Tool shank specifications:VDI30 DIN5480 W16 x 0.8 / BMT55-ER25
Max. tool speed: 4,000 rpm
Spindle motor specification:
Mitsubishi SJ-PF3.7-01 2.2 / 3.7 KW
Fanuc α2 2.2 / 3.7 KW

Tool and motor transmission gear ratio 1 : 1

LS-200DTR

Turret center height 100 mm

 

SERVO TURRET:
Servomotor: Mitsubishi HG-SR81JK ; Gear ratio 1/30
Hydraulic power source: P = 40 kg / cm²

Hydraulic cylinder clamping force 4,240 kg

 

POWERED TOOL HOLDER:
Tool shank specifications:VDI40 DIN5480 W20 x 0.8 / BMT65-ER32
Max. tool speed: 4,000 rpm
Spindle motor specification:
Mitsubishi SJ-PF5.5-01 3.7 / 5.5KW
Fanuc α3 3.7 / 5.5KW
Tool and motor transmission gear ratio 1 : 1

 

Specifications And Accessories

  • Specifications
  • Specifications of Power Tool Holder
  • Dimensions
MODEL   LS-160DTR LS-200DTR
Center height mm 80 100
Number of tools N 12T 12T
Rotating time (tool-to-tool) sec 0.4 0.47
Rotating time (including locking) sec 0.5 0.57
Total indexing time for 180° sec 0.85 1.4
Total indexing time for 180°
(including locking)
sec 0.9 1.5
Gear speed ratio   24:1 30:1
Curvic couplings type   3 Piece type 3 Piece type
Turret servo motor   HG-SR102JK
MR-J4-100A-RJ
HG-SR81JK
MR-J4-100A-RJ
Hydraulic working pressure Kgf/cm² (25~30)30 (35~40)40
Flow rate L/min. 20 30
Thrusting force of hyd. cyl. Kgf 2,350 4,240
Accuracy of repeatability mm 0.003 0.003
N.W. Kg 167 245
Tool servo motor   Mitsubishi SJ-PF3.7-01
Fanuc α2
Mitsubishi SJ-PF5.5-01
Fanuc α3